Heat Transfer | Emergency | Unloading | Safety Tips | Domestic Tips | Do's and Don'ts

 

	Before using the cylinder check for leakage from cylinder valve and other joints by applying soap solution.
	Always keep the cylinder in vertical position with valve on top.
	Cylinders must be installed at ground level on a level surface.
	Cylinders must be installed in a sufficiently ventilated place.
	Cylinders must not be installed near any source of heat.
	Do not keep cylinders exposed to sun, rain dust and heat.
	Regulators to be used on the cylinders must be of the same diameter as the cylinder valve.
	Cylinders not in use should always be capped.
	Always keep the telephone number of your distributor or emergency service cell in a safe place.
	The regulators should always be kept in OFF position when the cylinder is not in use.
	Cooking should be done on a raised platform, where the stove is placed above the cylinder level.
	The rubber tube should not be covered with any casing.
	Use BIS approved tubes. Check tube for cracks periodically and replace. After every two years replacement of tube is essential.